Author: Gimpy Accord? Date: 08-14-03 03:42
- 1286- C5 22 19 : SB 22.1
- 1289- C5 F3 C0 32 : CMPB F3, #32
- 128D- CA 1B : JLT 12AA
- 128F- C5 D9 C0 44 : CMPB D9, #44
- 1293- CD 15 : JGE 12AA
- 1295- 90 9D FA 60 : LCB A, 60FA
- 1299- CE 03 : JNE 129E
- 129B- D8 31 0C : JBR off 31.0, 12AA
- 129E- DB 1E 03 : JBR off 1E.3, 12A4
- 12A1- ED 19 03 : JBS off 19.5, 12A7
- 12A4- E9 31 0B : JBS off 31.1, 12B2
- 12A7- E9 27 21 : JBS off 27.1, 12CB
- 12AA- C5 22 08 : RB 22.0
- 12AD- C4 27 0A : RB off 27.2
- 12B0- CB 29 : SJ 12DB
I realize this is an old thread, but for the p28 rom users like me (shrug) set 60FA to FF.
Basiclaly insert the same comments where appropriate from doc's post... unless you're anal.
This became a real issue on my accord. My vtec xover is 3000rpm and its hard to get to 20mph by 3000rpm in my car :) So vtec would enguage about 4000 in 1st gear.
|
Copyright © 2002-present by the contributing authors. All material on this collaboration platform is the property of the
contributing authors, and is covered by the Non-Commercial Share-Alike License unless explicitly stated otherwise. |
|